trailer parts foto

Information about Trailer Parts

Information about Trailer Parts

Towing and trailers are  doubtlessly,one of the largest freely of heavy duty trailer parts . Our range as Buga Technic will cover almost all you would need to either building, maintaining or servicing a trailer parts.

Trailer Running Gear

We have in a breeze available spare parts such as; Suspension Units, Couplings and Brakes. We also offer kits to suit both braked and unbraked trailer spare parts ranging from 800kg-3400kg.

trailer parts foto
trailer parts foto

Lights and Electrics

More than 300 lights in stock, we have an large scaled range of lights to suit various applications. Multifunction LED and bulb rear lights are invariably stocked on our shelves along with replacement lenses and reflectors.

Chassis and Body Fittings

Our range of trailer body fittings includes truck spare parts such as Hinges, Cotter pins, Antiluce fasteners, Lynch pins, Overcentre catches, Handles, Gas Struts, Anchor plates, Rope hooks, Spring bolts, U bolts and much more.

Jockey Wheels and Prop Stands

Accessible are 34mm, 42mm and 48mm smooth and ribbed jockey wheels. The 34mm being suitable for the smaller unbraked trailer spare parts and the 48mm costated perfect for the more commercial trailers. Our range has also cover these shaft diameter with pressed and cast clamps to suit.

We provide an inclusive trailer spares parts service for a range of trailers including trucks, agricultural and construction trailers and supply an large scaled range of components, axles, suspension parts, hitches, tyres and much more suitable to buy online.

Our all trailer parts, constituent and accessories we supply are all high quality.

Our team includes a large number of staff with large scaled knowledge and experience in the industry and we are every second  hand to help with any requests, orders, queries or issues you may have. For more information about our trailer parts, accessories and components, get in touch.

truck gearbox parts

Technical Information About Gearbox Parts

Information about materials and components

As a heavy duty truck parts supplier, we have prepared an article for our Gearbox parts are typically made of steel or cast iron and may be dwelling in an iron unit. The grade of materials are used in the production of gearbox parts needs to be high to provide their durableness and safety. The main constituent of truck gearbox parts are typically:

  • Planetary gearbox sets: the sun, ring and planetary gears are structured of aluminium, stainless steel or brass. The materials are used varies depending on the manufacturer.
  • Hydraulic system: sends transmission fluid under persuade to all parts of the transmission. The new systems are more complex and are related with computerized electrical components.
  • Seals and gaskets: a seal is made of rubberise. Common gasket materials are paper, cork, rubberise, silicone and soft metal.
  • Torque converter in automatic gearbox parts or a clutch in manuals.
  • Regulator and modulator.
truck gearbox parts
truck gearbox parts

Gearbox parts are becoming more effective, increasing attention is paid to power and fuel saving, and the production of gearbox parts are becoming more cost effective. This market shows high potency for developing-country suppliers, because European imports of gearbox parts and their parts are increasing. The market is also changing quickly, due to technological and regulatory progress. This report shows the potential and most related trends and necessity for the European market on gearbox parts.

Quality requirements

The quality, reliableness and expected durableness of gearbox parts used in trucks in Europe is very high.

The quality of materials are used in the production of spare parts must be high to quarantee their durableness and safety and the supplied parts have to be attentively produced and examined, as defective parts may be returned. European producers will necessitate very high standards of gear parts, should they outsource. (Dimension) tolerances will be tight and the esthetics will be more important. For gearbox parts, attending will focus not only on the quality of the internal gear pats. The quality of the casting will also be investigated.

 

steering parts information

Technical Information About Steering Parts

The function of a steering parts system

When you rotate the steering wheel, the truck returns. But how does this truck steering parts system in trucks give you a smooth route forward? A group of parts called the steering parts system convey the movement of the steering parts wheel down the steering parts shaft to move the wheels left and right – despite of truck wheels don’t turn at the same lean.

steering parts information
steering parts information

The popular rack and pinion steering parts system

In small trucks on the road today, there is a torment for steering parts system. This transforms the rotational motion of the steering parts wheel into the additive motion that turns the wheels and guides your way. The system include a circular gear which locks teeth on a bar.

How does power steering parts affect the torment and pinion?

Coeval trucks, and especially trucks and effectuality trucks have a power steering parts system function – also called power-ribbed steering. This gives that extra power (either hydraulic or electric) to help turn the wheels and means parking and steering necessitate less effort than with simple manual force. The torment and pinion steering parts system is more or less different with power steering, with an added engine-driven pump or electric motor to aid the steering integration.

What are the constituent of the steering system in trucks?

These steering parts are strong and hard wearing enough to supply both strength and enduringness. Choosing parts which meet  manufacturer specifications means the whole integration will be responsive and long-lasting.

The return of four-wheel steering parts

Four-wheel steering parts control unit sits behind the rear axle of the Truck and affects the rear wheels as necessary. Truck wheels turn in opposite directions at low speeds, but at high speeds, turning all four wheels in concert helps to maintain stableness and prevent fishtailing.

Truck Air Brake Parts Information

Truck Air Brake Parts Information

Truck Air Brake Parts are essence to your truck’s talent to stop and are arguably one of the most important vehicle brake parts. Most trucks today have disc brakes, at least for the front wheels, anyway. But a lot of vehicles are now using disc brakes in the rear, too. In a disc-braking system the trucks wheels are affiliated to metal discs, or rotors, that spin along with the wheels. The job of the caliper is to slow the car’s wheels by creating rubbing with the rotors.

The brake caliper suits over the rotor like a clamp. Inside each caliper is a pair of metal plates bonded with rubbing material — these are called brake pads. The outboard brake pads are on the outside of the rotors and the inboard brake pads within. When you step on the brake, brake liquid from the master roller creates hydraulic pressure on one or more pistons in the brake caliper, forcing the pads against the rotor. The brake pads get high-rubbing surfaces and provide to slow the rotor down or even bring it to a fill in halt. When the rotor slows or stops, so does the wheel, because they’re affiliated to one another.

Air Brakes

Older trucks used drum brakes, where the motion of the wheels is slowed by rubbing between a rotating drum and brake shoes mounted inside the drum. This rubbing caused heat and gases to build up inside the drum, which often resulted in a loss of braking power known as brake fade. Because the brake pads in disc brake systems are outer to the disc rather than contained within a drum, they are more easily ventilated and heat doesn’t tend to build up quite as fast. Due to this reason, drum brakes have been largely replaced in modern vehicles by disc brakes; however, some less expensive cars still use drum brakes for the rear wheels, where less stopping power is required.

Parts of Air Brake

There are two kind of calipers: floating (or sliding) calipers and fixed calipers. Floating calipers move in and out congener to the rotor and have one or two pistons only on the inboard side of the rotor. This piston press the entire caliper when the brakes are operative, creating rubbing from the brake pads on both sides of the rotor. Fixed calipers, don’t move, but rather have pistons ordered on opposing sides of the rotor. Fixed calipers are generally preferred for their performance, but are more high priced than the floating kind. Some high-performance fixed calipers have two or more pairs of pistons (or “pots”) ordered on each side of the rotor — some have as many as six pairs total.

Especial tools are usable  when working with brake calipers, specially when replacing the brake pads.

heavy duty truck suspension parts

Technical Information about Suspension Parts

Heavy Duty Truck Suspension Parts are used to be cornering or lateral quickening causes the chassis to roll. Suspension Parts during a cornering steer, the weight apportionment of the entire truck changes and is transferred property around the four corners.

In a right-hand corner, the most weight is located on the left front wheel. If the truck is braking in the corner, even more weight is moved to the right front wheel.

Weight transfer is a good thing when it comes to generating clutch. But, weight transfer can cause the suspension parts to compress. When the suspension parts compresses, the suspension angles (camber and toe) exchange and alter the footprint of the tire. Some of the angle changes can help improve grasp, but past a certain point, they can subtract the contact repair of the tire.

Chassis roll is another factor in chassis dynamics. As a truck corners or speed up, the chassis or body will roll and compress the suspension parts. The amount of chassis roll is not only decided by the type of steer, but also by where the weight is in the truck along with how much the suspension compresses. Trucks with a higher center of gravitation will have more body roll, and under braking, will transfer more weight to the front tires.

suspension parts
suspension parts

Shock & Struts

Performance of shocks and struts, it is critical to understand compression and rebound. Increasing the compression setting of a shock or strut increases the amount of force necessary to compress the unit. Increasing the leaping setting increases the amount of force necessary to extend the unit. On some units, compression and leaping are tuned for low- and high-frequency suspension movements. Most non-adjustable performance shocks and struts will have more leaping when compared to the stock unit. This is controlled the spring and avoid undesirable weight transfer.

Setting an adjustable unit to the maximum settings for compression and leaping does not make for the best handling truck. Even though the shocks and struts are not physically connected, physics and several forces do connect them. When a shock is out of specification at one end, it will affect the weight transfer and handling at the other end or opposite corner. Both the race mechanic and engineer are trying to strike a balance between being “push” and being “loose.” They are also trying to make sure the settings are optimum for a kind of conditions and surfaces.

This impartiy can be experient if the truck has to do a panic stop and sudden lane change. When the weight loads the front tires, the rear spring enlarge, which makes the contact patch of the rear tire smaller. If the shock or strut is unable to control the leaping of the spring, additional weight is transferred to the front, which can cause the truck to nosedive even more.

During a panic stop, the trucks becomes unstable if it needs to swing to prohibit something in its path.

 

clutch parts

Information about Clutch Parts

Information about Clutch Parts

Whether you prefer mechanical or hydraulic clutches, Buga Technic Original spare part truck clutch parts work exactly and impeccable, due to their high-quality materials and first-class workmanship.

The various Buga Technic clutch parts are exactly matched and are available for many different truck models. That’s exactly what you’d expect from the real specialists.

Privatized quality

Our all clutch parts are manufactured using specific procedures that provide them with protection against abrasion and premature wear. That’s OEM quality you can depend on.

The clutch parts cylinders are lightweight and compact, the clutch cables carefully mensurable. The components confirmation one another perfectly, providing a supremely comfortable driving feeling.

truck clutch parts
truck clutch parts

The hardest-working component in any truck with a manual transmission is the clutch. Every start, every stop and every gear change means the clutch is charming and disengaging. The rubbing that is created between the clutch disc. Persuade plate and flywheel when the clutch engages generates heat and wear. And also the more the driver “rides” the clutch pedal or lets it slip overly, the hotter the clutch disc gets and the faster it wears.

Performance of Clutch Parts

Anything that increases the load on the clutch also speed up wear. This includes things like towing a heavy trailer, trucking heavy loads in a pickup truck, or spinning the tires in a muscle car. Performance engine mods that boost power also grow the require on the clutch.

All clutch parts are rated to handle a certain amount of torsion. The power rating of the clutch depends on the application. The power output of the engine and the type of driving or use the clutch will experiment. Larger, heavier trucks as well as performance trucks typically have stronger or higher capacity clutches. The clutch parts disc and pressure plate may have a larger diameter to spread the load across a larger surface area. The liner on the clutch parts disc may be a higher temperature, more wear resistant rubbing material. The midriff spring or coil springs in the pressure plate may be stiffer so the clutch can hold heavier loads without slithering.

Information about Hydraulic Pumps

Information about Hydraulic Pumps

Truck Hydraulic Pumps Parts are mechanical mechanism that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure persuade by the load.

When a hydraulic pumps manages, it performs two functions. First, its mechanical action creates a vacuum at the pump inlet which allows atmospheric persuade to force liquid from the reservoir into the inlet line to the pump. Second, its mechanical action conveys this liquid to the pump outlet and forces it into the hydraulic system.

Hydraulic Pumps Loading

A pump produces liquid movement or pour: it does not generate persuade. It produces the pour necessary for the development of persuade which is a operate of resistance to liquid flow in the system. For example, the persuade of the liquid at the pump outlet is zero for a pump not connected to a system (load). Further, for a pump conveying into a system, the persuade will rise only to the level necessary to overcome the resistance of the load.

Classification of pumps

All pumps may be classified as either positive-displacement or non-positive-displacement. Most pumps used in hydraulic systems are positive-displacement.

A non-positive-supplanting pump produces a continuous flow. However, because it does not provide a positive internal seal against slippage, its output diversify substantially as pressure diversify. Centrifugal and propeller pumps are examples of non-positive-supplanting pumps.

If the output port of a non-positive-supplanting pump were blocked off, the pressure would rise, and output would decrease to zero. Although the pumping element would carry on moving, flow would stop because of slippage inside the pump.

In a positive-supplantig pump, slippage is insignificant compared to the pump’s volumetric output flow. If the output port were blocked, pressure would increase instantly to the point that the pump’s pumping component or its case would fail probably detonate, if the drive shaft did not break beginning or the prime of pump mover would stall.

truck engine parts photo

Truck Engine Parts Information

The core of the engine is the roller, with the piston moving up and down inside the roller. Single cylinder engines are typical of most lawn movers, but generally trucks have more than one roller (four, six and eight roller are common). In a multi-roller engine, roller generally are arranged in one of three ways: inline, V or flat(also known as horizontally opposed or boxer), as shown in the figures to the left.

So that inline four we forementioned at the beginning is an engine with four roller ordered in a line. Different constellation have different advantages and disadvantages in terms of smoothness, production charge and shape characteristics. These advantages and disadvantages make them more fit for certain transport.

Cooling System

The Beck/Arnley Cooling parts line includes:

  • Fan Clutches
  • Water Outlet Flanges
  • Thermostats
  • New Water Pumps – colophony or metal impellers

Engine Components

Beck/Arnley offers a wide line up of Engine Components that meet OE particulars for form, fit and function.

  • Variable Valve Timing
  • Canister Purge Controls
  • Crankcase Vent Valves & PCV Valves
  • Oil Pan & Ancillary Engine Parts
  • Valve Cover Assemblies
  • Engine Mounts – incorporate Hydraulic, Vacuum, Active and Electric

Filtration

The Beck/Arnley Filtration line incorporate:

  • Cabin Air Filters
  • Fuel Filters
  • Oil Filters – designed for Synthetic and Conventional Oils
  • Transmission Filter Kits – includes o-rings and/or Gaskets as required
  • Air Filters

Gaskets

Beck/Arnley supply a comprehensive Gasket offering with the latest head gasket technology, subsuming Multi-Layer Steel (MLS) to meet the particular engine requirements.

Our line incorporate:

  • Manifold Gaskets
  • Ancillary Gaskets
  • Head Gasket Sets
  • Timing Kit Gaskets
  • Cover Gaskets
  • Oil Pan Gaskets

Do not forget to check our whole truck engine parts .